
A cooler box keeps things cold by using insulation. Insulation slows down how fast heat moves in. The KUER Cooler Box has two walls. It uses special PU foam. This makes the box keep things cold for many days.
Principle |
Description |
---|---|
Double-wall Structure |
Air gets trapped between layers. This slows heat moving in. |
Conduction |
The cooler’s walls stop heat from coming in directly. |
Convection |
Air inside does not move much. This keeps things colder. |
People who like outdoor activities helped cooler boxes become very popular.
Cooler boxes have insulation to keep things cold. Insulation makes heat move slower by stopping conduction and convection.
KUER has a rotomould cooler box design and PU foam insulation. This design lets it keep ice for up to 7 days.
Packing your cooler the right way is important for it to work well. Use block ice, put items in layers, and pack cold things first to keep things cool.
Pre-chill the cooler and open the lid as little as possible to keep it cold. Plan ahead so cold air stays inside.
Clean your cooler box after each use and store it in a cool, dry place. Doing this helps your cooler last longer.
A cooler box keeps things cold by stopping heat from coming in. It does this with insulation, which works like a shield. Insulation slows down heat in two ways: conduction and convection.
Conduction is when heat moves through solid things. Thick insulated panels in a cooler box block heat from getting inside.
Convection is when warm air moves around. Good insulation keeps warm air out and cold air in. This helps the inside stay cold.
Insulation works best when it is much colder inside than outside.
Cooler boxes use special materials to make this barrier strong. The KUER Cooler Box has a rotomolded design. This means it has a shell with no seams. That makes it tough and helps keep cold air inside. PU foam insulation fills the space between the walls. This foam blocks heat and keeps things cold for a long time.
Cooler boxes use insulation to slow down heat exchange. This barrier keeps food and drinks cold, even on hot days.
Some cooler boxes use electric power and cooling agents to stay cold. These electric models work in a different way than regular cooler boxes. Electric cool boxes use electric energy and cooling mediums to make the inside colder.
Ice retention means how long a cooler box keeps ice from melting. Better insulation helps ice last longer. Rotomolded cooler boxes, keep ice longer than regular ones.
Rotomolded coolers keep ice for about 63.72 hours.
Injection molded coolers keep ice for about 38.62 hours.
The seamless shell and thick foam in rotomolded coolers help them stay cold longer.
The KUER Cooler Box uses food-grade LLDPE inside and outside. It has a PU foam layer in the middle. This design keeps ice solid for up to 7 days, even if you open the lid a lot. Many people say the KUER Cooler Box works as well as more expensive brands. Strong latches and thick insulation keep the cold in and heat out.
A cooler box with good insulation and a tight seal keeps food and drinks cold for days. The KUER Cooler Box is special because of its smart design and great ice retention.
Insulation quality is the most important part of a cooler box. Good insulation keeps ice frozen for many days. The best coolers have thick layers of special materials. KUER uses PU foam. PU foam gives great thermal insulation and lasts a long time. The table below shows how common insulation materials compare:
Material |
Thermal Insulation Performance |
Durability |
Cost |
Environmental Impact |
---|---|---|---|---|
PU |
Excellent |
High |
High |
Moderate |
EPS |
Weak |
Moderate |
Low |
Poor |
EPP |
Good |
High |
Moderate |
Good |
KUER’s rotomolded design makes a shell with no seams. This shell stops leaks and makes the box stronger. People who go outdoors trust this design. It works well in tough places.
Seals are very important for keeping a cooler box cold. Gasket seals make an airtight barrier. This barrier stops warm air from getting in. It keeps cool air inside. So, the temperature inside stays steady for a long time. KUER coolers have leak-proof seals and strong hinges. These parts help the cooler stay cold, even when used a lot.
Tip: Always look at the gasket seal before you close the lid. A tight seal helps keep ice longer.
How you pack a cooler box can change how well it works. Good packing keeps cold air inside. It also stops warm air pockets from forming. Here are some easy tips:
Put ice or cold packs in the cooler box before adding food.
Use block ice or reusable ice packs to keep things cold longer.
Layer items: ice goes at the bottom, heavy things next, light things on top.
Put drinks at the bottom to keep them colder.
Use waterproof containers to keep food safe from melting ice.
Outdoor experts say you should use twice as much ice as food by weight. Some people use two cooler boxes—one for drinks and one for food. This helps keep things cold. Packing the right way helps the cooler box work better, even when it is hot outside.
Electric cool boxes use cooling agents and cooling mediums to keep things cold. These cool boxes use electric energy to keep the inside cold. How they work depends on their electric systems.
Pre-chilling helps a cooler box keep things cold longer. Experts say you should do a few things before using it. Put the cooler box in a cold spot first. Add ice or frozen gel packs to cool the inside. Block ice melts slower than small ice cubes. Fill the cooler box all the way to cut down empty space. Keep it in the shade while you use it. Leave melted water inside because it helps keep ice cold. These steps stop the cooler box from getting warm from the ice. KUER sells gel packs to make pre-chilling easier.
How you pack a cooler box changes how well it stays cold. Packing cold or frozen things helps keep the temperature low. Try these ways to pack better. Cool or freeze food and drinks before putting them in. Use both block ice and small ice cubes for best results. Use twice as much ice as food. Put ice at the bottom, then add items, and cover with more ice. Pack things in reverse order so you open the lid less. KUER has chopping boards and cup holders to help organize the cooler box. These tools help you find things fast and keep cold air inside.
Opening the lid a lot lets warm air in and cold air out. This makes the inside warmer. The table below shows what happens when you open the lid often:
Action |
Effect on Cooler Box Temperature |
---|---|
Frequent lid openings |
Warm air comes in, cold air leaves, temperature goes up |
Fewer lid openings |
Cold air stays, temperature stays the same |
Plan ahead so you do not open the lid too much. Some people use another cooler box just for drinks. This keeps the main cooler box cold for food that can spoil. Electric cooler boxes use cooling agents and cooling mediums to keep things cold. They work best if you do not open the lid a lot.
Tip: Organize your things and plan meals before you go. This helps you open the lid less and keeps everything colder.
Cleaning your cooler box often keeps it safe to use. After every trip, you should clean it, especially if you kept food inside.
Take out everything from the cooler box.
Rinse the inside with warm water.
Mix some mild dish soap with warm water. Use a soft brush or sponge to scrub all parts.
If it smells bad, sprinkle baking soda or use white vinegar or lemon juice.
Rinse again with clean water.
Wipe the outside with a soft cloth.
Dry the inside and outside well so mold does not grow.
Tip: Clean your cooler box very well at the end of each season. This helps get rid of smells and germs.
Check for mold or mildew before you put the cooler box away. Cleaning it often helps it work well, no matter what kind you have.
Storing your cooler box the right way helps it last longer. Always keep it in a cool, dry place. Do not put it in the sun because that can hurt the materials. Leave the lid a little open so air can move and bad smells do not form. Check the gasket seal often to make sure it is tight. This keeps your cooler box ready to use.
KUER cooler boxes are strong and last a long time. They use special molding and good materials like LLDPE and PU foam. Each cooler box is made in one piece so it does not leak. The sealing gasket is tough and keeps water inside. KUER checks every cooler box and has certifications like ISO 9001 and FDA. This makes them good for outdoor and electric use.
Quality Control Measure |
Description |
---|---|
Advanced Rotational Molding |
Makes the cooler box strong and hard to break |
Premium Materials |
LLDPE protects from the sun, PU foam keeps things cold |
Seamless Construction |
Stops leaks and keeps the box working well |
Durable Sealing Gasket |
Keeps water from leaking out |
Rigorous Quality Control |
Makes sure every cooler box is made well |
Note: Cleaning and storing your cooler box the right way helps it last longer and work better, no matter what type you have.
A cooler box keeps food and drinks cold with good insulation. It uses smart design to help things stay cold. Polyurethane foam slows down heat from getting in. This helps control the temperature better. KUER cooler boxes are strong and last a long time. They keep ice for many hours and make users happy. People who love the outdoors like rotomolded shells and tough parts. Seamless construction helps stop leaks. Electric cooler boxes cool even more and save energy. You can make your cooler work better by pre-chilling it. Use block ice and try not to open the lid a lot. Electric coolers keep things cold on long trips. Picking a good electric cooler box helps you have a great adventure.
Tip: Choose electric cooler boxes with comfy handles, germ-fighting liners, and easy-to-clean insides.
The KUER Cooler Box keeps ice frozen for up to 7 days under normal outdoor conditions. Its thick PU foam insulation and tight gasket seal help maintain low temperatures.
KUER uses food-grade LLDPE for the shell and advanced PU foam for insulation. The rotomolded design creates a seamless, impact-resistant structure that stands up to tough outdoor use.
Yes, people can pack food and drinks together. Organizers like chopping boards and cup holders help separate items. Packing cold items first improves cooling performance.
Use warm water and mild soap to clean the inside and outside. A soft brush removes stains. Dry the cooler completely before storing to prevent mold and odors.
Useful Links
Products
Solutions
Contact Info.
Copyright © 2024 Zhejiang Kuer Intelligent Technology Co., Ltd. All rights reserved.